| Package | com.greensock.loading.data |
| Class | public class ImageLoaderVars |
| Inheritance | ImageLoaderVars  Object |
vars parameter of an ImageLoader's constructor.
There are 2 primary benefits of using a ImageLoaderVars instance to define your ImageLoader variables:
onComplete where a Function is expected).USAGE
Note that each method returns the ImageLoaderVars instance, so you can reduce the lines of code by method chaining (see example below).
Without ImageLoaderVars:
new ImageLoader("photo1.jpg", {name:"photo1", estimatedBytes:11500, container:this, width:200, height:100, onComplete:completeHandler, onProgress:progressHandler})
With ImageLoaderVars
new ImageLoader("photo1.jpg", new ImageLoaderVars().name("photo1").estimatedBytes(11500).container(this).width(200).height(100).onComplete(completeHandler).onProgress(progressHandler))
NOTES:
new ImageLoader("photo1.jpg", new ImageLoaderVars().name("photo1").estimatedBytes(11500).vars);
Copyright 2010-2013, GreenSock. All rights reserved. This work is subject to the terms in http://www.greensock.com/terms_of_use.html or for Club GreenSock members, the software agreement that was issued with the membership.
| Property | Defined By | ||
|---|---|---|---|
| vars : Object [read-only] The generic Object populated by all of the method calls in the ImageLoaderVars instance. | ImageLoaderVars | ||
| Method | Defined By | ||
|---|---|---|---|
ImageLoaderVars(vars:Object = null)
Constructor
| ImageLoaderVars | ||
allowMalformedURL(value:Boolean):ImageLoaderVars Normally, the URL will be parsed and any variables in the query string (like "?name=test&state=il&gender=m") will be placed into a URLVariables object which is added to the URLRequest. | ImageLoaderVars | ||
alpha(value:Number):ImageLoaderVars Sets the ContentDisplay's alpha property. | ImageLoaderVars | ||
alternateURL(value:String):ImageLoaderVars If you define an alternateURL, the loader will initially try to load from its original url and if it fails, it will automatically (and permanently) change the loader's url to the alternateURL and try again. | ImageLoaderVars | ||
autoDispose(value:Boolean):ImageLoaderVars When autoDispose is true, the loader will be disposed immediately after it completes (it calls the dispose() method internally after dispatching its COMPLETE event). | ImageLoaderVars | ||
bgAlpha(value:Number):ImageLoaderVars Controls the alpha of the rectangle that is drawn when a width and height are defined. | ImageLoaderVars | ||
bgColor(value:uint):ImageLoaderVars When a width and height are defined, a rectangle will be drawn inside the ContentDisplay Sprite immediately in order to ease the development process. | ImageLoaderVars | ||
blendMode(value:String):ImageLoaderVars Sets the ContentDisplay's blendMode property. | ImageLoaderVars | ||
centerRegistration(value:Boolean):ImageLoaderVars If true, the registration point will be placed in the center of the ContentDisplay which can be useful if, for example, you want to animate its scale and have it grow/shrink from its center. | ImageLoaderVars | ||
container(value:DisplayObjectContainer):ImageLoaderVars A DisplayObjectContainer into which the ContentDisplay Sprite should be added immediately. | ImageLoaderVars | ||
context(value:LoaderContext):ImageLoaderVars To control whether or not a policy file is checked (which is required if you're loading an image from another domain and you want to use it in BitmapData operations), define a LoaderContext object. | ImageLoaderVars | ||
crop(value:Boolean):ImageLoaderVars When a width and height are defined, setting crop to true will cause the image to be cropped within that area (by applying a scrollRect for maximum performance). | ImageLoaderVars | ||
estimatedBytes(value:uint):ImageLoaderVars Initially, the loader's bytesTotal is set to the estimatedBytes value (or LoaderMax.defaultEstimatedBytes if one isn't defined). | ImageLoaderVars | ||
hAlign(value:String):ImageLoaderVars
When a width and height is defined, the hAlign determines how the image is horizontally aligned within that area. | ImageLoaderVars | ||
height(value:Number):ImageLoaderVars Sets the ContentDisplay's height property (applied before rotation, scaleX, and scaleY). | ImageLoaderVars | ||
name(value:String):ImageLoaderVars A name that is used to identify the loader instance. | ImageLoaderVars | ||
noCache(value:Boolean):ImageLoaderVars If true, a "gsCacheBusterID" parameter will be appended to the url with a random set of numbers to prevent caching (don't worry, this info is ignored when you LoaderMax.getLoader() or LoaderMax.getContent() by url or when you're running locally). | ImageLoaderVars | ||
onCancel(value:Function):ImageLoaderVars A handler function for LoaderEvent.CANCEL events which are dispatched when loading is aborted due to either a failure or because another loader was prioritized or cancel() was manually called. | ImageLoaderVars | ||
onComplete(value:Function):ImageLoaderVars A handler function for LoaderEvent.COMPLETE events which are dispatched when the loader has finished loading successfully. | ImageLoaderVars | ||
onError(value:Function):ImageLoaderVars A handler function for LoaderEvent.ERROR events which are dispatched whenever the loader experiences an error (typically an IO_ERROR or SECURITY_ERROR). | ImageLoaderVars | ||
onFail(value:Function):ImageLoaderVars A handler function for LoaderEvent.FAIL events which are dispatched whenever the loader fails and its status changes to LoaderStatus.FAILED. | ImageLoaderVars | ||
onHTTPStatus(value:Function):ImageLoaderVars A handler function for LoaderEvent.HTTP_STATUS events. | ImageLoaderVars | ||
onIOError(value:Function):ImageLoaderVars A handler function for LoaderEvent.IO_ERROR events which will also call the onError handler, so you can use that as more of a catch-all whereas onIOError is specifically for LoaderEvent.IO_ERROR events. | ImageLoaderVars | ||
onOpen(value:Function):ImageLoaderVars A handler function for LoaderEvent.OPEN events which are dispatched when the loader begins loading. | ImageLoaderVars | ||
onProgress(value:Function):ImageLoaderVars A handler function for LoaderEvent.PROGRESS events which are dispatched whenever the bytesLoaded changes. | ImageLoaderVars | ||
onSecurityError(value:Function):ImageLoaderVars A handler function for LoaderEvent.SECURITY_ERROR events which onError handles as well, so you can use that as more of a catch-all whereas onSecurityError is specifically for SECURITY_ERROR events. | ImageLoaderVars | ||
prop(property:String, value:*):ImageLoaderVars
Adds a dynamic property to the vars object containing any value you want. | ImageLoaderVars | ||
requireWithRoot(value:DisplayObject):ImageLoaderVars LoaderMax supports subloading, where an object can be factored into a parent's loading progress. | ImageLoaderVars | ||
rotation(value:Number):ImageLoaderVars Sets the ContentDisplay's rotation property. | ImageLoaderVars | ||
rotationX(value:Number):ImageLoaderVars Sets the ContentDisplay's rotationX property. | ImageLoaderVars | ||
rotationY(value:Number):ImageLoaderVars Sets the ContentDisplay's rotationY property. | ImageLoaderVars | ||
rotationZ(value:Number):ImageLoaderVars Sets the ContentDisplay's rotationZ property. | ImageLoaderVars | ||
scaleMode(value:String):ImageLoaderVars
When a width and height are defined, the scaleMode controls how the loaded image will be scaled to fit the area. | ImageLoaderVars | ||
scaleX(value:Number):ImageLoaderVars Sets the ContentDisplay's scaleX property. | ImageLoaderVars | ||
scaleY(value:Number):ImageLoaderVars Sets the ContentDisplay's scaleY property. | ImageLoaderVars | ||
smoothing(value:Boolean):ImageLoaderVars When smoothing is true (the default), smoothing will be enabled for the image which typically leads to much better scaling results (otherwise the image can look crunchy/jagged). | ImageLoaderVars | ||
vAlign(value:String):ImageLoaderVars
When a width and height is defined, the vAlign determines how the image is vertically aligned within that area. | ImageLoaderVars | ||
visible(value:Boolean):ImageLoaderVars Sets the ContentDisplay's visible property. | ImageLoaderVars | ||
width(value:Number):ImageLoaderVars Sets the ContentDisplay's width property (applied before rotation, scaleX, and scaleY). | ImageLoaderVars | ||
x(value:Number):ImageLoaderVars Sets the ContentDisplay's x property (for positioning on the stage). | ImageLoaderVars | ||
y(value:Number):ImageLoaderVars Sets the ContentDisplay's y property (for positioning on the stage). | ImageLoaderVars | ||
z(value:Number):ImageLoaderVars Sets the ContentDisplay's z property (for positioning on the stage). | ImageLoaderVars | ||
| vars | property |
vars:Object [read-only] The generic Object populated by all of the method calls in the ImageLoaderVars instance. This is the raw data that gets passed to the loader.
public function get vars():Object| ImageLoaderVars | () | Constructor |
public function ImageLoaderVars(vars:Object = null)Constructor
Parametersvars:Object (default = null) |
| allowMalformedURL | () | method |
public function allowMalformedURL(value:Boolean):ImageLoaderVars Normally, the URL will be parsed and any variables in the query string (like "?name=test&state=il&gender=m") will be placed into a URLVariables object which is added to the URLRequest. This avoids a few bugs in Flash, but if you need to keep the entire URL intact (no parsing into URLVariables), set allowMalformedURL:true. For example, if your URL has duplicate variables in the query string like http://www.greensock.com/?c=S&c=SE&c=SW, it is technically considered a malformed URL and a URLVariables object can't properly contain all the duplicates, so in this case you'd want to set allowMalformedURL to true.
Parameters
value:Boolean |
ImageLoaderVars |
| alpha | () | method |
public function alpha(value:Number):ImageLoaderVars Sets the ContentDisplay's alpha property.
Parameters
value:Number |
ImageLoaderVars |
| alternateURL | () | method |
public function alternateURL(value:String):ImageLoaderVars If you define an alternateURL, the loader will initially try to load from its original url and if it fails, it will automatically (and permanently) change the loader's url to the alternateURL and try again. Think of it as a fallback or backup url. It is perfectly acceptable to use the same alternateURL for multiple loaders (maybe a default image for various ImageLoaders for example).
Parameters
value:String |
ImageLoaderVars |
| autoDispose | () | method |
public function autoDispose(value:Boolean):ImageLoaderVars When autoDispose is true, the loader will be disposed immediately after it completes (it calls the dispose() method internally after dispatching its COMPLETE event). This will remove any listeners that were defined in the vars object (like onComplete, onProgress, onError, onInit). Once a loader is disposed, it can no longer be found with LoaderMax.getLoader() or LoaderMax.getContent() - it is essentially destroyed but its content is not unloaded (you must call unload() or dispose(true) to unload its content). The default autoDispose value is false.
Parameters
value:Boolean |
ImageLoaderVars |
| bgAlpha | () | method |
public function bgAlpha(value:Number):ImageLoaderVars Controls the alpha of the rectangle that is drawn when a width and height are defined.
Parameters
value:Number |
ImageLoaderVars |
| bgColor | () | method |
public function bgColor(value:uint):ImageLoaderVars When a width and height are defined, a rectangle will be drawn inside the ContentDisplay Sprite immediately in order to ease the development process. It is transparent by default, but you may define a bgColor if you prefer.
Parameters
value:uint |
ImageLoaderVars |
| blendMode | () | method |
public function blendMode(value:String):ImageLoaderVars Sets the ContentDisplay's blendMode property.
Parameters
value:String |
ImageLoaderVars |
| centerRegistration | () | method |
public function centerRegistration(value:Boolean):ImageLoaderVars If true, the registration point will be placed in the center of the ContentDisplay which can be useful if, for example, you want to animate its scale and have it grow/shrink from its center.
Parameters
value:Boolean |
ImageLoaderVars |
| container | () | method |
public function container(value:DisplayObjectContainer):ImageLoaderVars A DisplayObjectContainer into which the ContentDisplay Sprite should be added immediately.
Parameters
value:DisplayObjectContainer |
ImageLoaderVars |
| context | () | method |
public function context(value:LoaderContext):ImageLoaderVars To control whether or not a policy file is checked (which is required if you're loading an image from another domain and you want to use it in BitmapData operations), define a LoaderContext object. By default, the policy file will be checked when running remotely, so make sure the appropriate crossdomain.xml file is in place. See Adobe's LoaderContext documentation for details and precautions.
Parameters
value:LoaderContext |
ImageLoaderVars |
| crop | () | method |
public function crop(value:Boolean):ImageLoaderVars When a width and height are defined, setting crop to true will cause the image to be cropped within that area (by applying a scrollRect for maximum performance). This is typically useful when the scaleMode is "proportionalOutside" or "none" so that any parts of the image that exceed the dimensions defined by width and height are visually chopped off. Use the hAlign and vAlign special properties to control the vertical and horizontal alignment within the cropped area.
Parameters
value:Boolean |
ImageLoaderVars |
| estimatedBytes | () | method |
public function estimatedBytes(value:uint):ImageLoaderVars Initially, the loader's bytesTotal is set to the estimatedBytes value (or LoaderMax.defaultEstimatedBytes if one isn't defined). Then, when the loader begins loading and it can accurately determine the bytesTotal, it will do so. Setting estimatedBytes is optional, but the more accurate the value, the more accurate your loaders' overall progress will be initially. If the loader is inserted into a LoaderMax instance (for queue management), its auditSize feature can attempt to automatically determine the bytesTotal at runtime (there is a slight performance penalty for this, however - see LoaderMax's documentation for details).
Parameters
value:uint |
ImageLoaderVars |
| hAlign | () | method |
public function hAlign(value:String):ImageLoaderVars
When a width and height is defined, the hAlign determines how the image is horizontally aligned within that area. The following values are recognized (you may use the com.greensock.layout.AlignMode constants if you prefer):
"center" (the default) - The image will be centered horizontally in the area"left" - The image will be aligned with the left side of the area"right" - The image will be aligned with the right side of the areaParameters
value:String |
ImageLoaderVars |
| height | () | method |
public function height(value:Number):ImageLoaderVars Sets the ContentDisplay's height property (applied before rotation, scaleX, and scaleY).
Parameters
value:Number |
ImageLoaderVars |
| name | () | method |
public function name(value:String):ImageLoaderVars A name that is used to identify the loader instance. This name can be fed to the LoaderMax.getLoader() or LoaderMax.getContent() methods or traced at any time. Each loader's name should be unique. If you don't define one, a unique name will be created automatically, like "loader21".
Parameters
value:String |
ImageLoaderVars |
| noCache | () | method |
public function noCache(value:Boolean):ImageLoaderVars If true, a "gsCacheBusterID" parameter will be appended to the url with a random set of numbers to prevent caching (don't worry, this info is ignored when you LoaderMax.getLoader() or LoaderMax.getContent() by url or when you're running locally).
Parameters
value:Boolean |
ImageLoaderVars |
| onCancel | () | method |
public function onCancel(value:Function):ImageLoaderVars A handler function for LoaderEvent.CANCEL events which are dispatched when loading is aborted due to either a failure or because another loader was prioritized or cancel() was manually called. Make sure your onCancel function accepts a single parameter of type LoaderEvent (com.greensock.events.LoaderEvent).
Parameters
value:Function |
ImageLoaderVars |
| onComplete | () | method |
public function onComplete(value:Function):ImageLoaderVars A handler function for LoaderEvent.COMPLETE events which are dispatched when the loader has finished loading successfully. Make sure your onComplete function accepts a single parameter of type LoaderEvent (com.greensock.events.LoaderEvent).
Parameters
value:Function |
ImageLoaderVars |
| onError | () | method |
public function onError(value:Function):ImageLoaderVars A handler function for LoaderEvent.ERROR events which are dispatched whenever the loader experiences an error (typically an IO_ERROR or SECURITY_ERROR). An error doesn't necessarily mean the loader failed, however - to listen for when a loader fails, use the onFail special property. Make sure your onError function accepts a single parameter of type LoaderEvent (com.greensock.events.LoaderEvent).
Parameters
value:Function |
ImageLoaderVars |
| onFail | () | method |
public function onFail(value:Function):ImageLoaderVars A handler function for LoaderEvent.FAIL events which are dispatched whenever the loader fails and its status changes to LoaderStatus.FAILED. Make sure your onFail function accepts a single parameter of type LoaderEvent (com.greensock.events.LoaderEvent).
Parameters
value:Function |
ImageLoaderVars |
| onHTTPStatus | () | method |
public function onHTTPStatus(value:Function):ImageLoaderVars A handler function for LoaderEvent.HTTP_STATUS events. Make sure your onHTTPStatus function accepts a single parameter of type LoaderEvent (com.greensock.events.LoaderEvent). You can determine the httpStatus code using the LoaderEvent's target.httpStatus (LoaderItems keep track of their httpStatus when possible, although certain environments prevent Flash from getting httpStatus information).
Parameters
value:Function |
ImageLoaderVars |
| onIOError | () | method |
public function onIOError(value:Function):ImageLoaderVars A handler function for LoaderEvent.IO_ERROR events which will also call the onError handler, so you can use that as more of a catch-all whereas onIOError is specifically for LoaderEvent.IO_ERROR events. Make sure your onIOError function accepts a single parameter of type LoaderEvent (com.greensock.events.LoaderEvent).
Parameters
value:Function |
ImageLoaderVars |
| onOpen | () | method |
public function onOpen(value:Function):ImageLoaderVars A handler function for LoaderEvent.OPEN events which are dispatched when the loader begins loading. Make sure your onOpen function accepts a single parameter of type LoaderEvent (com.greensock.events.LoaderEvent).
Parameters
value:Function |
ImageLoaderVars |
| onProgress | () | method |
public function onProgress(value:Function):ImageLoaderVars A handler function for LoaderEvent.PROGRESS events which are dispatched whenever the bytesLoaded changes. Make sure your onProgress function accepts a single parameter of type LoaderEvent (com.greensock.events.LoaderEvent). You can use the LoaderEvent's target.progress to get the loader's progress value or use its target.bytesLoaded and target.bytesTotal.
Parameters
value:Function |
ImageLoaderVars |
| onSecurityError | () | method |
public function onSecurityError(value:Function):ImageLoaderVars A handler function for LoaderEvent.SECURITY_ERROR events which onError handles as well, so you can use that as more of a catch-all whereas onSecurityError is specifically for SECURITY_ERROR events. Make sure your onSecurityError function accepts a single parameter of type LoaderEvent (com.greensock.events.LoaderEvent).
Parameters
value:Function |
ImageLoaderVars |
| prop | () | method |
public function prop(property:String, value:*):ImageLoaderVars
Adds a dynamic property to the vars object containing any value you want. This can be useful
in situations where you need to associate certain data with a particular loader. Just make sure
that the property name is a valid variable name (starts with a letter or underscore, no special characters, etc.)
and that it doesn't use a reserved property name like "name" or "onComplete", etc.
For example, to set an "index" property to 5, do:
prop("index", 5);
Parameters
property:String — Property name
| |
value:* — Value
|
ImageLoaderVars |
| requireWithRoot | () | method |
public function requireWithRoot(value:DisplayObject):ImageLoaderVars LoaderMax supports subloading, where an object can be factored into a parent's loading progress. If you want LoaderMax to require this loader as part of its parent SWFLoader's progress, you must set the requireWithRoot property to your swf's root. For example, vars.requireWithRoot = this.root;.
Parameters
value:DisplayObject |
ImageLoaderVars |
| rotation | () | method |
public function rotation(value:Number):ImageLoaderVars Sets the ContentDisplay's rotation property.
Parameters
value:Number |
ImageLoaderVars |
| rotationX | () | method |
public function rotationX(value:Number):ImageLoaderVars Sets the ContentDisplay's rotationX property.
Parameters
value:Number |
ImageLoaderVars |
| rotationY | () | method |
public function rotationY(value:Number):ImageLoaderVars Sets the ContentDisplay's rotationY property.
Parameters
value:Number |
ImageLoaderVars |
| rotationZ | () | method |
public function rotationZ(value:Number):ImageLoaderVars Sets the ContentDisplay's rotationZ property.
Parameters
value:Number |
ImageLoaderVars |
| scaleMode | () | method |
public function scaleMode(value:String):ImageLoaderVars
When a width and height are defined, the scaleMode controls how the loaded image will be scaled to fit the area. The following values are recognized (you may use the com.greensock.layout.ScaleMode constants if you prefer):
"stretch" (the default) - The image will fill the width/height exactly. "proportionalInside" - The image will be scaled proportionally to fit inside the area defined by the width/height"proportionalOutside" - The image will be scaled proportionally to completely fill the area, allowing portions of it to exceed the bounds defined by the width/height. "widthOnly" - Only the width of the image will be adjusted to fit."heightOnly" - Only the height of the image will be adjusted to fit."none" - No scaling of the image will occur. Parameters
value:String |
ImageLoaderVars |
| scaleX | () | method |
public function scaleX(value:Number):ImageLoaderVars Sets the ContentDisplay's scaleX property.
Parameters
value:Number |
ImageLoaderVars |
| scaleY | () | method |
public function scaleY(value:Number):ImageLoaderVars Sets the ContentDisplay's scaleY property.
Parameters
value:Number |
ImageLoaderVars |
| smoothing | () | method |
public function smoothing(value:Boolean):ImageLoaderVars When smoothing is true (the default), smoothing will be enabled for the image which typically leads to much better scaling results (otherwise the image can look crunchy/jagged). If your image is loaded from another domain where the appropriate crossdomain.xml file doesn't grant permission, Flash will not allow smoothing to be enabled (it's a security restriction).
Parameters
value:Boolean |
ImageLoaderVars |
| vAlign | () | method |
public function vAlign(value:String):ImageLoaderVars
When a width and height is defined, the vAlign determines how the image is vertically aligned within that area. The following values are recognized (you may use the com.greensock.layout.AlignMode constants if you prefer):
"center" (the default) - The image will be centered vertically in the area"top" - The image will be aligned with the top of the area"bottom" - The image will be aligned with the bottom of the areaParameters
value:String |
ImageLoaderVars |
| visible | () | method |
public function visible(value:Boolean):ImageLoaderVars Sets the ContentDisplay's visible property.
Parameters
value:Boolean |
ImageLoaderVars |
| width | () | method |
public function width(value:Number):ImageLoaderVars Sets the ContentDisplay's width property (applied before rotation, scaleX, and scaleY).
Parameters
value:Number |
ImageLoaderVars |
| x | () | method |
public function x(value:Number):ImageLoaderVars Sets the ContentDisplay's x property (for positioning on the stage).
Parameters
value:Number |
ImageLoaderVars |
| y | () | method |
public function y(value:Number):ImageLoaderVars Sets the ContentDisplay's y property (for positioning on the stage).
Parameters
value:Number |
ImageLoaderVars |
| z | () | method |
public function z(value:Number):ImageLoaderVars Sets the ContentDisplay's z property (for positioning on the stage).
Parameters
value:Number |
ImageLoaderVars |